MRCOOL O-ES-09-HP-C-230C-O1 vs Senville SENA-06HF-OG
- Heating efficiency: the Senville SENA-06HF-OG pairing has the higher HSPF2 (14.8 vs 12.5).
- Cooling efficiency: the MRCOOL O-ES-09-HP-C-230C-O1 pairing has the higher SEER2 (27.4 vs 25.5).
- Cold weather: at 5°F the MRCOOL O-ES-09-HP-C-230C-O1 pairing is rated for more heat (11,500 vs 7,700 BTU/h).
- Per 1,000 heating full-load hours, the estimated electricity difference is about $89 at the U.S. average rate.
| MRCOOL O-ES-09-HP-C-230C-O1 | Senville SENA-06HF-OG | |
|---|---|---|
| Cooling BTU/h | 9,000 | 6,000 |
| SEER2 | 27.4 | 25.5 |
| EER2 | 15.4 | 18 |
| HSPF2 | 12.5 | 14.8 |
| Heat at 47°F | 12,000 | 7,000 |
| Heat at 17°F | 12,000 | 8,700 |
| Heat at 5°F | 11,500 | 7,700 |
| % of 47°F at 5°F | 96% | 110% |
| COP at 5°F | 1.8 | 2.39 |
| Cold climate | Yes | Yes |
| Refrigerant | R-454B (GWP:470 | Lower GWP) | R-454B (GWP:470 | Lower GWP) |
| Connected | No | No |
| Most Efficient | Yes | Yes |
| Indoor unit (pairing shown) | O-09-HP-WMAH-230C-O | SENA-06HF-IGG |
| AHRI ref. | 217447801 | 215735294 |
| Cool kWh/1,000 h (est.) | 328 | 235 |
| Heat kWh/1,000 h (est.) | 960 | 473 |
| Record | 4428961 | 3630041 |
Cost estimates: cooling kWh ≈ cooling capacity × full-load hours ÷ SEER2 ÷ 1,000; heating kWh ≈ 47°F heating capacity × full-load hours ÷ HSPF2 ÷ 1,000. "Per 1,000 full-load hours" is a yardstick for comparing systems, not a prediction of your bill; your hours depend on climate, house and settings. Rate: U.S. average residential 18.31¢/kWh (EIA, July 2026 (preliminary)).
See MRCOOL on the manufacturer's site (plain link, not an affiliate link)
See Senville on the manufacturer's site (plain link, not an affiliate link)